77
9-3.3 GROUP SETUP
A ‘‘GROUP’’ means a set of video channels from one or many DVRs, which means, user can
organize channels from different DVRs to be set in a group. This function allows you to monitor
and manager channels from multiple DVRs easily and flexible.
Steps：
(1) Add a new group and set its name and description.
(2) Click SELECT which will bring up a new window.
(3) Check the specific channels that you would like to include in the group. To include all
channels of a DVR, just check the DVR.
Icon Description
Add a group for a specific user.
Delete a DVR for a specific user.
(4) Click OK to return to the previous window.
(5) Select a display mode.
(6) Drag a channel from the lower left panel into the main display to a preferred location. Or,
change the channel location in the main display by mouse dragging.
(7) You can ‘SELECT again to add other channels, but the un-saved channel locations will be
lost.
(8) Click OK to save the setup.
1. Click the group and a window
will pop out.
2. Click the camera channels
to be use in this group.
To Next Page
Loading...
