Toshiba e-STUDIO 306SE - Regular Cleaning Procedures

Chapter 3 MAINTENANCE
42
2
1
1
Open the front cover of the Finisher.
2
1
2
Holding the lever, move the nisher to the left
until it comes to a stop.
2
1
3
Open the Hole Punch Unit while pushing the
lever.
4
Take o the staple cartridge.
5
Push the buttons of both sides of the cartridge to
take o the staple case.
6
Install a new staple case.
Stapler Unit of Inner Finisher (MJ-1032)