Need help?Do you have a question about the Toshiba E-STUDIO 3525AC and is the answer not in the manual?
General| Print Technology | Laser |
|---|---|
| Max Print Resolution | 1200 x 1200 dpi |
| Copy Resolution | 600 x 600 dpi |
| Max Paper Capacity | 3, 200 sheets |
| Duplex Printing | Yes |
| Scan Resolution | 600 x 600 dpi |
| Fax Speed | 33.6 Kbps |
| Fax Resolution | 400 x 400 dpi |
| Memory | 4 GB |
| Hard Disk Drive | 320 GB |
| Copy Speed (Black) | 35 ppm (Letter) |
| Standard Paper Capacity | 550 sheets |
| Paper Size | Legal, Letter |
| Scanner Type | Color Scanner |
| Scan Speed (Simplex) | 73 spm |
| Connectivity | USB 2.0, Ethernet |
| Print Speed (Black) | 35 ppm (Letter) |
| Print Speed (Color) | 35 ppm (Letter) |
| Control Panel | 9" Color WSVGA Touch Screen |
Guidance on how to effectively use the manual, including symbols and structure.
Explanation of warning, caution, and note symbols used throughout the manual.
Identifies the intended users of the manual, including general users and administrators.
Details how model names are represented by series names within the manual.
Information on available optional equipment and where to find further details.
Notes on variations in screen displays and illustrations based on model and settings.
Defines common abbreviations used in the manual, such as DSDF and RADF.
Indicates where to find information regarding trademarks for the equipment.
Guides users on how to resolve issues based on various screen messages and examples.
Detailed steps for locating and clearing paper jams in different parts of the machine.
Procedures for clearing staple jams that occur in the finisher or saddle stitch unit.
Instructions for replacing color and monochromatic toner cartridges when they are depleted.
Steps for replacing the waste toner box for specific e-STUDIO series models.
Guidance on refilling staples in the finisher and saddle stitch units for continuous operation.
Procedure for cleaning the main chargers and LED print heads on specific e-STUDIO models.
Detailed cleaning instructions for main chargers and slit glass on specific e-STUDIO models.
Instructions for cleaning the main chargers on specific e-STUDIO models.
Steps for emptying and cleaning the hole punch dust bin for various finisher types.
Troubleshooting steps to prevent printed sheets from overflowing the exit tray.
Guidance on how to address issues with paper curling on the exit tray.
Recommendations for weekly cleaning of scanning areas, glass, guides, and front cover.
To Next Page
