4.TopAccess
[Administration] Tab 45
TopAccess
[Create self-signed certificate] screen
3 SCEP(Automatic) Automatically acquires the certificate for encrypted communications using IP
sec or SSL/TLS.
CA Server Address (Primary) — Enter the IP address of FQDN of the CA server.
You can enter up to 128 alphanumerical characters and symbols.
CA Server Address (Secondary) — Enter the IP address of FQDN of the CA
server. You can enter up to 128 alphanumerical characters and symbols.
MFP’s Address in Common Name in the Certificate — Select whether you
use the IP address or FQDN as the address of this equipment to be entered in
the [Common Name] box of the certificate. [IP Address] is set as the default.
Timeout — Enter a timeout period for quitting communication when no
response is received from the CA server. Specify within the range from 1 to 120
seconds. “10” is set as the default.
CA Challenge — Enter the password for the CA challenge. You can enter up to
32 alphanumerical characters. You need to enter a maximum of 32
alphanumerical characters for the first time when you extend the password
length.
SAN — Set the SAN attribute if necessary. Enter DNS, IP address, URI, e-mail
address and OID by dividing them with ||. There are some restrictions as
below.
DNS: You can enter up to 253 letters with alphanumerical characters and
symbols “.” and “-”.
URI: You can use alphanumerical characters and symbols “- . _ ~ : / ? # ! @ $ ' ( )
* + ; =”.
e-mail address: You need to enter “@" and “.” in the address.
Signature Algorithm — Select SHA1 or MD5 as the signature algorithm.
Poll Interval — Specify the polling interval. [1 Minute] is set as the default.
Maximum Poll Duration — Specify the polling duration. [8 Hours] is set as the
default.
[Request] button — Click this button to request the certificate.
[Delete] button — Deletes the registered certificate.
Item name Description
1 [Save] button Saves the self-signed certificate.
2 [Cancel] button Cancels creating the certificate.
3 Country/Region Name Enter the country or region name using two alphanumerical characters and
symbols. (Example: JP)
4 State or Province Name Enter the state or province name with alphanumerical characters and
symbols. You can enter up to 128 characters.
Item name Description
To Next Page
Loading...
