4.TopAccess
56 [Administration] Tab
10 Details Opens the screen that shows detailed information and settings of the
application.
You can set the department or user authentication at the startup of each
application. Click [Details] to open [Details] screen, select [Enable] at
[Authentication], and click [Save], so that the authentication screen appears
at the startup of the application. Select [Disable] and click [Save] not to
show the authentication screen. Click [Cancel] to cancel the setting. This
[Authentication] setting works at the next startup of the application. It does
not appear for the background application.
You can enable or disable the connection to the external devices for the
embedded application that has the communication function. When
[Enable] is selected at [External Device Connection], the embedded
application is ready to connect to the external devices. When [Disable] is
selected, it is not ready for connection. Click [Save] after changing the
setting or [Cancel] to discard it.
[Use of external USB Device] shows whether the embedded application can
use external USB devices.
If the application can make use the received fax images, [Use Received
Document] reads “Used”. If not possible, nothing appears for this function.
To authenticate users at the startup of the embedded application, enable
“User Authentication According To Function”.
You cannot change [Authentication] for embedded applications that require
the authentication and embedded applications that do not have the
authentication setting.
The contents of the license agreement are displayed by clicking “Display” in
License Agreement.
“Language” is displayed when the embedded application contains the
language pack.
11 System Application Displays the system applications installed in the equipment.
12 Rollback Rolls back the installed system application to the previous one. When you
click the button, the confirmation messages appear. Follow instructions and
click the button.
13 Details Opens the screen that shows detailed information and settings of the system
application.
Item name Description
To Next Page
Loading...
