4.TopAccess
58 [Administration] Tab
Embedded Application Setting
You can enable or disable embedded application functions.
Proxy Setting
You can set a proxy for the application.
The proxy settings are basically common to the Embedded Web Browser, Idle Screen, and Application functions. If
you change them for one function, they change accordingly for others.
Item name Description
1 Enable Application Sets the application to enable/disable.
Enable — Select this to enable application.
Disable — You cannot install, uninstall, start, or make settings for the
application on the [Application List] screen. Also, you cannot start the
application from the MFP’s touch panel.
You can always install, roll back and make settings of the system applications
without being affected by this setting.
2 Enforcement automatic
screen change
When a warning occurs during the Home application, set whether or not to
automatically switch to the [JOB STATUS] screen.
3 Home Button Auto
Registration
Sets whether or not automatically to register a button of an application on the
Home screen when it is installed.
Item name Description
1 Host Name Enter a host name for the proxy server.
2 Port Number Enter a port number for the proxy server.
3 Bypass proxy settings for
these addresses
Enter URLs that proxy server is not used by dividing them using semicolons (;).
4 Account ID Enter the account ID of the proxy server.
5 Password Enter the password of the proxy server.
To Next Page
Loading...
