2.PRINTING FROM WINDOWS
Before Using the Printer Driver 11
2 PRINTING FROM WINDOWS
2
Select the printer driver of this equipment, and click [File] menu, [Run as administrator]
and select [Properties]. Enter the administrator password if required.
y If the [File] menu is not displayed, press [Alt].
y The [User Account Control] dialog box appears.
y The printer driver properties dialog box appears if the User Account Control setting is disabled. Go to step 4.
3
Click [Continue] in the [User account control] dialog box.
The printer driver properties dialog box appears.
4
Display the [Configuration] tab menu, and set the following options.
Model Selection — This sets the model type of the equipment.
Drawers — This sets whether the optional drawers or Large Capacity Feeder (optional) (not available for some
countries or regions) are installed.
External LCF — This sets whether or not External Large Capacity Feeder (optional) is installed.
Finisher — This sets whether or not the Finisher (optional) is installed.
Hole Punch Unit — This sets whether or not the Hole Punch Unit (optional) is installed.
Large Capacity Feeder (optional) is not available for some countries or regions.
For more information about each item, see the descriptions about the [Configuration] tab.
P.56 “[Configuration] tab”
5
Click [Drawer Settings].
The [Drawer Settings] dialog box appears.
To Next Page
Loading...
