Toshiba E-studio 5520c - Page 137

4.PRINTING FROM UNIX/Linux
Printing from Application 135
4 PRINTING FROM UNIX/Linux
 Image Attributes
The Image Attributes can be selected using the following options.
Example: The command to set “1” to the brightness for the print job is “lp -o brightness=1 <filename>”
Option Value Alternate Value Description
brightness=value Specify the brightness. You can specify the following
values:
-4, -3, -2, -1, 0, 1, 2, 3, 4
contrast=value Specify the contrast. You can specify the following
values:
-4, -3, -2, -1, 0, 1, 2, 3, 4
saturation=value Specify the saturation. You can specify the following
values:
-4, -3, -2, -1, 0, 1, 2, 3, 4
sharpness=value Specify the sharpness. You can specify the following
values:
-4, -3, -2, -1, 0, 1, 2, 3, 4
backgroundadjus
tment=value
Specify the background adjustment. You can specify
the following values:
-4, -3, -2, -1, 0, 1, 2, 3, 4