Chapter 4 ADVANCED FUNCTIONS / TROUBLESHOOTING
54
Copying or scanning originals without blank sheets
EXAMPLE
To copy or scan originals without blank
sheets, follow the setting below before
copying or scanning them. (In this case, two
blank originals are omitted when six
originals are copied or scanned.)
When copying
1.
Press the [EDIT] tab, and then press on the touch panel in the basic menu for the copying
functions.
2. Press [OMIT BLANK PAGE] and then
[OK].
When scanning
1.
Press [COMMON SETTING], and then press in the basic menu for the scanning functions.
2.
Press [ON] in the “OMIT BLANK
PAGE” setting and then [OK].
For details, refer to the Copying Guide and Scanning Guide.
COPY FAX SCAN e-FILING PRINT
To Next Page
Loading...
