Toshiba E-Studio 557 - Attach Scanned Data to Email

Advanced Functions
5
55
Attaching the scanned data to an E-mail
The procedure for attaching the
scanned data to an E-mail and sending
it to the specied E-mail address is as
follows.
Place the original(s).
& P.16 “Placing originals” in this manual
1
Press [E-MAIL] and then [TO] on the touch panel.
2
1
Specify the E-mail address and then
2
press [OK].
3
Dene the settings for the le as required and then press [OK].
4
Press [SCAN] on the touch panel. Scanning starts.
5
COPY FAX SCAN e-FILING PRINT