1.TROUBLESHOOTING FOR THE HARDWARE
Cleaning the Inside of the Equipment 87
TROUBLESHOOTING FOR THE HARDWARE
8
Insert the cleaner through the service hole of the developer under the arrow to the end.
9
Pull the cleaner back out until the round hole appears. Repeat this 3 times for each of the 4
colors.
10
Attach the cleaner with its top on the left and its holding side on the right.
Check that the cleaner is fixed to the cover.
11
Return the 4 green levers located under the toner cartridges.
2
1
To Next Page
Loading...
