Need help?Do you have a question about the Toshiba E-STUDIO 6528A and is the answer not in the manual?
General| Brand | Toshiba |
|---|---|
| Model | E-STUDIO 6528A |
| Category | All in One Printer |
| Language | English |
Guidance on understanding the manual, covering symbols, audience, models, options, and screen conventions.
Explains warning, caution, note, tip, and reference symbols for safe and effective operation.
Identifies general users and administrators as the intended readers of this manual.
Details how model names are replaced with series names for consistent reference throughout the manual.
Directs users to reference material for available optional equipment and features of the system.
Informs users that screen details may vary by model and installation, and illustrations are for general guidance.
Defines common abbreviations used in the manual, such as DSDF, RADF, and ADF for document feeders.
Refers users to the Safety Information section for details regarding trademarks related to the equipment.
Guides users on resolving issues by interpreting various screen messages and examples shown on the equipment's touch panel.
Detailed instructions for locating and clearing paper jams in various parts of the machine, including ADF, drawers, and finishers.
Step-by-step procedures for clearing staple jams occurring in the stapler of the finisher or saddle stitch unit.
Instructions for replacing the toner cartridge when it runs out, covering both color and monochromatic models.
Guidance on how to replace the waste toner box when it is full, including proper disposal procedures.
Procedures for refilling staples in the finisher and saddle stitch unit staplers when the staple supply is depleted.
Instructions for cleaning internal components like main chargers and LED print heads to maintain optimal image quality.
Advice on resolving issues where printed sheets spill out of the exit tray, related to paper size and stopper placement.
Solutions for paper curling problems on the exit tray, involving the removal or reinstallation of specific parts.
Recommendations for weekly cleaning of scanning areas, guides, and the front cover to ensure clean scans and equipment performance.
To Next Page
