Toshiba E-STUDIO 6528A - Inner Finisher Hole Punch Unit

1.TROUBLESHOOTING FOR THE HARDWARE
Cleaning the Hole Punch Dust Bin 95
TROUBLESHOOTING FOR THE HARDWARE
 Inner Finisher Hole Punch Unit
1
Lift up the control panel and then open the front cover of the finisher.
2
While holding the green lever, move the finisher to the left until it stops.
3
Open the Hole Punch Unit while pushing the green lever.
4
After moving the hole punch dust bin to the left, pull it toward you.
5
Dispose of the paper punchings.
2
1
2
1
1
2