Toshiba E-STUDIO 6528A - Cleaning the Hole Punch Dust bin; Finisher; Saddle Stitch Finisher Hole Punch Unit

94 Cleaning the Hole Punch Dust Bin
0.Cleaning the Hole Punch Dust Bin
When the hole punch dust bin becomes full, dispose of the paper punchings following the procedure below.
 Finisher / Saddle Stitch Finisher Hole Punch Unit
1
Open the Hole Punch Unit cover.
2
Pull out the hole punch dust bin.
3
Dispose of the paper punchings.
4
Push back in the hole punch dust bin.
5
Close the Hole Punch Unit cover.