68
MFP local authentication
Windows Domain authentication, LDAP authentication
The domain name previously set by the network
administrator is displayed in [DOMAIN]. For LDAP
authentication, the LDAP server name is displayed in
[LDAP] instead of [DOMAIN].
The menu for user authentication
appears.
1
If the displayed domain name or LDAP server
name is not yours, press
to select one
belonging to you.
Press [USER NAME].
2
Enter the user name (maximum 128
letters) and then press [OK].
3
Press [PASSWORD].
4
Enter the password (maximum 64
letters) and then press [OK].
5
Press [OK].
6
The equipment becomes being ready to
perform copying and other functions.
7
To Next Page
Loading...
