Toshiba E-Studio 657 - Specifications of Equipment; Equipment Dimensions and Weight

6
Specications of Equipment
71
e-STUDIO557/657/757/857 Specications
Model name DP-5570/6570/7570/8570
Type Console type
Original glass Fixed
Printing (copying) system Indirect electrophotographic method
Developing system 2-component magnetic brush developing
Fixing method Induction heating
Photosensor type OPC
Original scanning system
Flat surface scanning system
(When the Reversing automatic document feeder is installed: Fixed scanning system by
feeding the original)
Original scanning sensor Linear CCD sensor
Scanning light source Xenon lamp
Resolution
Scanning 600 dpi x 600 dpi
Writing 2400 dpi x 600 dpi (Smoothing process)
Acceptable originals Sheets, books and 3-dimensional objects
Acceptable original size Max. A3 or LD
Acceptable copy
paper size
Drawer
A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, ST-R, COMP, 13”LG, 8.5”SQ, 8K, 16K,
16K-R
Bypass
Paper size within 100 - 297 mm (3.9" - 11.7") (Length), 148 - 432 mm (5.8" - 17") (Width)
Acceptable copy paper weight 64 - 209 g/m
2
(17 lb. Bond - 110 lb. Index) (drawer and bypass feeding)
Warm-up time 130 seconds or less
Recovery time
(from the sleep mode)
45 seconds or less
First copy time (A4 or LT portrait)
e-STUDIO557/657: less than 4.0 sec.
e-STUDIO757/857: less than 3.5 sec.
Continuous copy speed Refer to the Copying Guide.
Multiple copying Up to 9999 sheets (digital key entry)
Excluded image
width
Copy
Leading edge: 3.0±2.0 mm (0.12"±0.08"), Trailing edge: 2.0±2.0 mm (0.08"±0.08"),
Both edge: 2.0±2.0 mm (0.08"±0.08")
Printer
Leading edge: 4.2±2.0 mm (0.17"±0.08"), Trailing edge: 4.2±2.0 mm (0.17"±0.08"),
Both edge: 4.2±2.0 mm (0.17"±0.08")
Reproduction
ratio
Actual size 100±0.5%
Zoom
25 - 400% (in 1% increments)
For the Reversing automatic document feeder 25 - 200% (in 1% increments)
Paper supply
Drawer Approx. 500 sheets (80 g/m
2
, 20 lb. Bond)
Bypass Approx. 100 sheets (80 g/m
2
, 20 lb. Bond)
Toner density adjustment Magnetic auto-toner system
Exposure control Automatic plus manual selection from 11 exposure step
USB interface USB 2.0 (Hi-Speed)
Environment (for normal use) Temperature: 10 - 30 °C (50 - 86 °F), Humidity: 20 - 85% (No Condensation)
Power requirements and Power
consumption
(including optional equipments)
AC 220-240 V±10%, 9 A (50/60 Hz): 2.0 kW or less
AC 115 V±10%, 16 A (50/60 Hz): 2.0 kW or less
Dimensions (equipment only) 698 mm (27.48") (W) x 789 mm (31.06") (D) x 1176 mm (46.3") (H)
Weight Approx. 197 kg (434.3 lb.) (equipment including developer and drum)
Space occupied (equipment only)
1395 mm (54.92") (W) x 789 mm (31.06") (D) (With fully extended bypass tray and opened
receiving tray)
Storage capacity Max. 2000 images (1 job) (Toshiba’s own chart)
• This specication varies depending on the printing conditions, environment and status of the installed options.
• Specications and appearance are subject to change without notice in the interest of product improvement.