2 SENDING A FAX
30 Basic Procedures
Acceptable size of originals
This equipment can send a fax of the following originals.
You can place 1-sided or 2-sided originals of the media types, such as standard paper, recycled
paper and paper with holes (2, 3 or 4 holes) for filing, on the RADF (Reversing Automatic
Document Feeder). On the ADF (Automatic Document Feeder), you can place 1-sided originals
of the above media types. On the original glass, you can place 1-sided originals of the above
media types as well as OHP film, tracing paper, booklets and three-dimensional objects.
* Only for e-STUDIO2507 Series
Do not place any heavy objects (4 kg/9 lb. or over) on the original glass and do not
press on it with force.
If the original is any of the following sizes, it is automatically rotated and sent as
described below.
A4 A4-R
LT LT-R
Location
Maximum
size
Paper
weight
Maximum
Number that
Can be Set
Original size
Original glass Length: 297 mm
(11.69")
Width: 432 mm
(17.01")
A/B format:
A3*, A4, A4-R*, A5-R, B4*,
B5, B5-R*, FOLIO*
LT format:
LD*, LG*, LT, LT-R*, ST-R,
COMP*
K format:
8K*, 16K, 16K-R
ADF/RADF Length: 297 mm
(11.69")
Width: 433.8 mm
(17.08")
50 to 104 g/m
2
(13.3 to 27.7 lb.)
50 sheets A/B format:
A3, A4, A4-R, A5-R, B4,
B5, B5-R
LT format:
LD, LG, LT, LT-R, ST-R,
COMP
K format:
8K, 16K, 16K-R
To Next Page
Loading...
