What causes signal error on Toshiba All in One Printer?
If your Toshiba All in One Printer displays 'Signal Error or Line Condition Error', retry communications. Frequent failures may indicate a phone line problem. If possible, move the unit to another line and try your communications again.
How to clear original jam in Toshiba All in One Printer?
If your Toshiba All in One Printer displays an 'Original jam' error, the solution is to clear the jammed original.
What to do if my Toshiba All in One Printer says 'Door open'?
If your Toshiba All in One Printer shows a 'Door open' error, make sure to firmly close the open door.
How to resolve partial email timeout error on Toshiba All in One Printer?
If your Toshiba All in One Printer displays 'Partial Email timeout error', ask the sender to resend the Email, or change the Partial Wait time setting.
How to resolve invalid parameter error on Toshiba All in One Printer?
If your Toshiba All in One Printer displays 'Invalid parameter', and a template is used, form the template again. If the error still occurs, turn the power OFF and then back ON, and perform the job again.
How to resolve SMTP server connection error on Toshiba All in One Printer?
If your Toshiba All in One Printer displays 'SMTP server connection error', ask your administrator to set the login name or password of SMTP server and perform the job again. Check if the SMTP server is operating properly.
How to fix job control module access abnormality on Toshiba All in One Printer?
If your Toshiba All in One Printer displays 'Job control module access abnormality', turn the power OFF and then back ON. Perform the job in error again. If the recovery is still not completed, contact your service representative.
How to fix message reception error on Toshiba All in One Printer?
If your Toshiba All in One Printer displays 'Message reception error', turn the power OFF and then back ON. Perform the job in error again.
How to fix software failure on Toshiba All in One Printer?
If your Toshiba All in One Printer displays 'Software failure', retry communications. If the error still occurs, contact your service representative.
How to fix hardware noise on Toshiba All in One Printer?
If your Toshiba All in One Printer displays 'Hardware noise', retry communications. If the error still occurs, contact your service representative.
General| Print Speed (Black) | 23 ppm |
|---|---|
| Maximum Paper Size | A3 |
| Copy Speed | 23 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Functions | Copier, Printer, Scanner |
| Paper Capacity | 250 sheets |
| Paper Weight | 60-163 g/m² |
| Interface | USB 2.0, Ethernet |
| Operating System Compatibility | Windows, Mac, Linux |
| Memory | 64 MB |
| Type | Laser |
To Next Page
