Toshiba E-STUDIO2329A - Page 26

3.INSTALLATION IN macOS
26 Installing the Printer in macOS
3
Click [IP] and specify the items as described below.
Address: <IP address or DNS name of this equipment>
Protocol: Internet Printing Protocol - IPP
Queue: Print
Name: <Any Name>
Location: <Any Name>
Use:
TOSHIBA e-STUDIO2329A for e-STUDIO2329A
TOSHIBA e-STUDIO2829A for e-STUDIO2829A
TOSHIBA e-STUDIO2822AM for e-STUDIO2822AM
TOSHIBA e-STUDIO2822AF for e-STUDIO2822AF
 In the [Name] box, the name that is entered in the [Address] box is automatically displayed.
 Even when you enter the IP address or DNS name of this equipment in the [Address] box, the correct name
might not be selected in the [Use] box. Select [Other] in the [Use] box and select the correct PPD file for the
equipment from the [/Library/Printers/PPDs/Contents/Resources/en.lproj] folder.
- EST2329A.ppd for e-STUDIO2329A
- EST2829A.ppd for e-STUDIO2829A
- EST2822AM.ppd for e-STUDIO2822AM
- EST2822AF.ppd for e-STUDIO2822AF
4
Click [Add].
The Installable Options window appears.
If the screen below appears, click [Continue] to continue the printer setup.
5
Set the following options.
For e-STUDIO2329A/2829A:
Drawer 2 — Select this when the drawer 2 is installed.
Drawer 2 and 3 — Select this when the drawer 2 and 3 are installed.
Drawer 2, 3 and 4 — Select this when the drawer 2, 3 and 4 are installed.
ADU — Select the check box to use the Automatic Duplexing Unit.
For e-STUDIO2822AM/2822AF:
ADU — Select the check box to use the Automatic Duplexing Unit.