5 INSTALLING PRINTER DRIVERS FOR UNIX/Linux
192 Setting Up the CUPS
Color Settings 4 (For Color MFPs)
Finishing
Option Value Alternative Value Description
Background
Adjustment
-4, -3, -2, -1, 0
, 1, 2, 3, 4 Select the density level of the background.
Brightness -4, -3, -2, -1, 0
, 1, 2, 3, 4 Select the brightness.
Contrast -4, -3, -2, -1, 0
, 1, 2, 3, 4 Select the contrast.
Saturation -4, -3, -2, -1, 0
, 1, 2, 3, 4 Select the saturation.
Sharpness -4, -3, -2, -1, 0
, 1, 2, 3, 4 Select the sharpness.
Use Sharpness
Filter
Off
, On Selecting this option allows you to adjust the
sharpness for printing.
[Continue] button Determines the selected items.
Option Value Alternative Value Description
Destination Printer’s Default
Exit Tray
Tray 1
Tray 2
Upper Exit Tray
Side Exit Tray
Job Separator Upper
Job Separator Lower
Select a destination.
The destinations that you can choose vary
depending on the model and the installed
options.
Folding Off
, On Select whether the Folding feature is enabled or
not.
Hole Punch Off
Long Edge Punch without rotation
Short Edge Punch without rotation
Long Edge Punch with 180 degree
rotation
Short Edge Punch with 180 degree
rotation
Select the hole punch option.
Stapling Off
Upper Left (Portrait)/Upper Right
(Landscape)
Middle Left (Portrait)/Middle Top
(Landscape)
Lower Left (Portrait)/Upper Left
(Landscape)
Upper Right (Portrait)/Lower Right
(Landscape)
Middle Right (Portrait)/Middle Bottom
(Landscape)
Lower Right (Portrait)/Lower Left
(Landscape)
Middle Top (Portrait)/Middle Right
(Landscape)
Middle Bottom (Portrait)/Middle Left
(Landscape)
Saddle Stitch (Portrait)/Saddle Stitch
(Landscape)
Select whether a print job is stapled or its
locations.
“Saddle Stitch (Portrait)/Saddle Stitch
(Landscape)” can be selected only when the
Saddle Stitch Finisher is installed.
[Continue]
button
Determines the selected items.
To Next Page
Loading...
Need help?
General
