3 INSTALLING PRINTER DRIVERS FOR WINDOWS
46 Installing the Printer Drivers
If your TOSHIBA MFP is not found
If your TOSHIBA MFP is not found, you must first install the printer driver by temporarily selecting a local port
and then configuring the Raw TCP/LPR port.
If this equipment is not discovered over the network after the installation is started, a dialog box indicating
this appears. Click [Continue] to continue the configuration.
7
Select [Use the following port] and then select “LPT1: ”. Then click [OK].
If a dialog box prompting you to confirm the setting of a printer for normal use appears, click [Yes]
or [No].
If the [Windows Security] dialog box appears, click [Install this driver software anyway].
To Next Page
Loading...
Need help?
General
