9.Troubleshooting
Troubleshooting for the Hardware 109
Troubleshooting
3
Check the inside of the fuser unit for the hidden misfed paper when you cannot see it.
1. Open the front cover of the equipment.
2. Check if misfed paper remains inside the fuser unit through the window for checking for paper misfeeds.
3. Close the front cover of the equipment.
4
Return the transport guide holding the green knob.
5
Remove any remaining paper from the upper/lower part of the fuser unit.
When you remove paper from the lower part of the fuser unit, grasp its front and rear and carefully pull it
out.
Be careful not to cut yourself on the paper.
Be careful not to touch the transfer belt. This could cause malfunctioning of the equipment or the poor imaging.
To Next Page
Loading...
