Unified Controller nv series G3 I/O Adapter (GA932) Module Instruction Manual
v
CAUTION
Prohibited
Do not touch anything other
than the operation part
(setting switches inside the
module), such as the IC parts
and terminals, connectors,
and soldered surfaces inside
the module.
Doing so may result in electrostatic
breakdown of the ICs and LSIs, causing
failure. Also, an injury may occur due
to the ends of the part lead wires, or
burns may occur due to hot parts.
Prohibited
Do not disassemble or modify
the device or module.
It may cause malfunction or failure as
well as loss of safety of the device.
Prohibited
Do not forcefully bend, pull, or
twist the power cord and
cables.
It may cause breaks or heating.
Prohibited
Do not insert any metal inside
the module.
It may cause fire.
Mandatory
Use wireless communication
equipments as mobile phone,
smart phone and transceiver
at least 30cm away from the
module, transmission cables
and I/O cable.
It may cause malfunctions.
5.
Safety Precautions on Transportation, Storage, and Disposal
CAUTION
Mandatory
Observe ordinances and
rules.
When discarding the product, observe
the ordinances and rules of the local
government.
Prohibited
For transportation and storage
of the product, use a
conductive bag and packaging
box.
Otherwise it will cause failure.
To Next Page
Loading...
