vi User’s Manual
L300/L300D series
ENERGY STAR
®
Program
Optical disc drive standards
TOSHIBA L300/L300D series computer is shipped with one of the following
drives preinstalled: CD-RW/DVD-ROM, DVD Super Multi (± R DL), DVD
Super Multi (± R DL) /w Label Flash, HD DVD-ROM.
Your computer model may be ENERGY STAR
®
Compliant. If the model you
purchased is compliant, it is labeled with the ENERGY STAR
®
logo on the
computer and the following information applies.
TOSHIBA is a partner in the Environmental Protection Agency’s (EPA)
ENERGY STAR
®
Program and has designed this computer to meet the
latest ENERGY STAR
®
guidelines for energy efficiency. Your computer
ships with the power management options preset to a configuration that will
provide the most stable operating environment and optimum system
performance for both AC power and battery modes.
To conserve energy, your computer is set to enter the low-power Sleep
mode which shuts down the system and display within 15 minutes of
inactivity in AC power mode. TOSHIBA recommends that you leave this
and other energy saving features active, so that your computer will operate
at its maximum energy efficiency. You can wake the computer from Sleep
mode by pressing the power button.
Products that earn the ENERGY STAR
®
prevent greenhouse gas emissions
by meeting strict energy efficiency guidelines set by the US EPA and the EU
Commission. According to the EPA, a computer meeting the new ENERGY
STAR
®
specifications will use between 20% and 50% less energy
depending on how it is used.
Visit http://www.eu-energystar.org or http://www.energystar.gov for more
information regarding the ENERGY STAR Program.
■ The drive employs a laser system. To ensure proper use of this
product, please read this instruction manual carefully and retain for
future reference.
Should the unit ever require maintenance, contact an authorized
service location.
■ Use of controls, adjustments or the performance of procedures other
than those specified may result in hazardous radiation exposure
■ To prevent direct exposure to the laser beam, do not try to open the
enclosure.
To Next Page
Loading...
Need help?
General
