Toshiba LEV112318W840TE - User Manual

E-core LED Light Engine
Technical Information
Toshiba Lighting & Technology Corporation

Summary

2. Specifications

(1) 1100 lumens type

Details specifications for the 1100 lumens LED light engine variants, including lumen output, color temperature, CRI, beam angle, voltage, frequency, power factor, dimming, wattage, life time, efficacy, and dimensions.

(2) 1600 lumens type

Details specifications for the 1600 lumens LED light engine variants, including lumen output, color temperature, CRI, beam angle, voltage, frequency, power factor, dimming, wattage, life time, efficacy, and dimensions.

4. Installation Manual

5. Heat release design

(1)Case Temperature (Tcase) measurement method

Defines Case Temperature (Tcase) as the temperature at the cap center ($30mm) of the LLE and explains tc definition by EN 62031, including specific values for 1100 lm and 1600 lm types.

(2)Heat release design for fixtures

Emphasizes the importance of heat release design for fixtures to ensure safe operation and product specifications, recommending heat sink Tcase limits for 1100 lm and 1600 lm types.

6. Characteristics

(1)Use condition

(2)Temperature characteristics

Wide beam angle type

Middle beam angle type

(4)Dimming characteristics

Details the dimming capability, stating that trailing edge dimming is possible (10-100%) and leading-edge dimming cannot be used.

7. Wiring diagram

(Appendix) Socket specification

(6)注意事項

Provides important notes regarding screw usage, installation procedure (15° turn), wire handling, and final product quality management.

Toshiba LEV112318W840TE Specifications