Toshiba LF400 Series User Manual

Configure excitation current, meter size, and frequency settings.

Define indication units for flow rate measurements.

Set range types, values, and hysteresis for flow measurement.

Adjust damping constant and low cutoff frequency for signal stability.

Perform zero point adjustment for accurate flow readings.

Configure functions for digital outputs DO1 and DO2.

Set counting rate and pulse width for totalization.

Configure preset counts, high/low alarms, and empty pipe alarms.

Configure rate-of-change limit, control time, and fixed output modes.

Perform manual zero offset and flow rate calibration.

Messages and content for self-diagnostics, setting, and limit alarms.

Defines accuracy based on flow rate percentage and velocity.

Compares meter sizes with corresponding flow rates in different units.

Diagram showing LCD display, power cable, signal cable, and control keys.