Toshiba M-472 - Page 21

2-8-10. Unit Pinch Roller Ass’y Removal
1) Remove the washer slit (D.
2) Lift the unit pinch roller @.
3) Lift the spring arm pinch a.
&p Q WASHER-SLIT
@ UNIT-PINCH ROLLER
@ SPRING-ARM PINCH
Fig. 36 Unit Pinch Roller Ass’y Removal
2-8-11. Assembly of Unit Pinch Roller
1) Install the unit pinch roller as shown in Fig. 29.
(Refer to A, 6)
UNIT-PINCH ROLLER
!-II
t-l
I y
.
-
<TOP VIEW>
Fig. 37 Assembly of Unit Pinch Roller
2-8-12. Exploded View of Lever Pinch Comp Ass’y,
Lever Pinch Cam, Arm Review Ass’y &
Lever Review Ass’y
LEVER-PINCH COMP
ARM-REVIEW ASSY
LEVER-REVIEW
LEVER-PINCH CAM
Fig. 38 Exploded View of Lever Pinch Comp Ass’y, Lever
Pinch Cam, Arm Review Ass’y 81 Lever Review
Ass’y
2-8-13. Lever Pinch Comp Ass’y Removal
1) Release the tab @ in the direction of arrow.
(Refer to detail drawing)
2) Lift the lever pinch camp ass’y @.
NOTE : Don’t touch the lever pinch camp ass’y @ to
audio head base during removal.
@ LEVER-PINCH
COMP ASS’Y
<DETAIL>
Fig. 39 Lever Pinch Comp Ass’y Removal
2-20