Toshiba MITOS VT6 AIR User Manual

02/10/2015
Manual_MITOS_VT6_AIR_ver3p3_eng
MITOS VT6 AIR
USER MANUAL

Toshiba MITOS VT6 AIR Specifications

General

Brand	Toshiba
Model	MITOS VT6 AIR
Category	Control Panel
Language	English

Summary

GENERAL DESCRIPTION

MITOS VT6 AIR Overview

Measure, visualization, control device for pressure, velocity, flow with temp sensor.

GENERAL FEATURES

Device Specifications and Interfaces

Details physical specs, power, temp range, dimensions, weight, and user interfaces.

FUNCTIONING PARAMETERS

PID Control Constants

Hysteresis, Kp, Ki, Kd for PID control tuning and stability.

Control & Feedback Settings

PID Set Point Configuration

Sets the target value for the PID regulated variable.

FUNCTIONING MODES

Just Display Mode

Manual Operation Modes

Automatic PID Mode

Mode for automatic frequency control using PID.

MANUAL FUNCTIONING

Manual Control Requirements

AUTOMATIC PID FUNCTIONING

Automatic Regulation Process

Automatic frequency regulation to maintain a set point via PID control.

Automatic PID Requirements

Requirements: Modality=CONTROL, Control type=AUTOMATIC, inverter frequency control.

PID Set Point Variation

RESET INVERTER ALARM

Inverter Alarm Reset Method

Procedure to reset an inverter alarm using the STOP/RESET button.

SERIAL COMMUNICATION SETUP

TTL/RS485 Dip-switch Config

Configuration of the dip-switch for TTL/RS485 serial communication.

PRESSURE MEASURE/REGULATION CONNECTION

Pressure Connection Diagram

Diagram for pressure measurement and regulation connections.

Filtered Output Recommendation

FLOW OR VELOCITY MEASURE/REGULATION CONNECTION

Pitot Pipe Usage

Procedure for using Pitot Pipe for flow and velocity measurement/regulation.

Flow/Velocity Connection Diagram

Diagram for flow/velocity measurement and regulation connections.