TOS-SN-1
Γ For additional assistance, please contact Toshiba Adjustable Speed Drive Marketing Dept. at (800) 872-2192
Extended Panel Operation Manual
Introduction
The “Extended Panel (TOS-SN-1)” for TOSVERT series inverter can be used for
programming or monitoring, but does not contain internal memory. Please read the section
regarding safety precaution in the “Extended Panel Operation Manual” before powering up your
inverter. When using the External Panel, the display and adjustment of the inverter can be
controlled remotely for up to 5 meters.
This operation manual gives explanations of how to connect and program the “Extended
Panel.” Please read the entire manual carefully before attempting to control your inverter via the
Extended Panel. In addition, the manual can be used for future operator maintenance and
inspection. The Extended Panel is provided with a connection cable between the inverter and
Option Unit. Any of the cables below may also be used with the TOS-SN-1
Part number of connection cable between the inverter and Option Unit Cable Length
CAB0011
1.5m
CAB0013
3m
CAB0015
5m
Connections and Start Up
CN1
To Next Page
Need help?
General
