Toshiba MM-EG34P(BK) - Multi-Stage Cooking; Lock Function for Children; Memory Function; Inquiring Function

English
13
MULTISTAGE COOKING
At most 2 stages can be set for cooking. In multi-stage cooking, if one stage is defrosting, then defrosting shall be
placed at the first stage automatically.
Note: Auto cooking cannot work in the multi-stage cooking.
Example: If you want to cook with 80% microwave power for 5 minutes + 60% microwave power for 10 minutes.
The cooking steps are as following:
(1) Press “TIME COOK” once, then press “5”, “0”, “0” to set the cooking time;
(2) Press “POWER” once, then press “8” to select 80% microwave power.
(3) Press “TIME COOK” once, then press “1”, “0”, “0”, “0” to set the cooking time;
(4) Press “POWER” once, then press “6” to select 60% microwave power.
(5) Press “START/ +30 SEC.” to start cooking.
LOCK FUNCTION FOR CHILDREN
Lock: In waiting state, press “STOP/CANCEL” for 3 seconds, there will be a long “beep” denoting the entering into
the children-lock state; meanwhile, screen will display “
“.
Lock quitting: In locked state, press “STOP/CANCEL” for 3 seconds, there will be a long “beep” denoting that lock is
released.
MEMORY FUNCTION
(1) Press “0(Memory)” to choose memory 1-3 procedure. The screen will display 1, 2, 3.
(2) If the procedure has been set, press “START/ +30 SEC.” to use it. If not, continue to set the procedure. Only one
or two stages can be set.
(3) After finishing the setting, press “START/ +30 SEC.” once to save the procedure. If press “START/ +30 SEC.”
again, it will start cooking.
Example: To set the following procedure as the second memory, that is memory 2.
To cook the food with 80% microwave power for 3 minutes and 20 seconds.
The steps are as follow:
a. In waiting state, press “0(Memory)” twice, stop pressing until the screen displays “2”.
b. Press “TIME COOK” once, then press “3”,”2”, “0” in order.
c. Press “POWER” once, “PL10” displays, then press “8” and “PL8” displays.
d. Press “START/ +30 SEC.” to save the setting. Buzzer sounds once and “2” displays. If you press
“START/+30SEC.” again, the procedure will be saved as the memory 2 and operated.
e. If the electricity is not cut off, the procedure will be saved all the time. If it is, the procedure need to
reset.
f. If you want to run the saved procedure, in waiting state, press “0(Memory)” twice, screen displays “2”,
then press “START/+30SEC.” to run.
INQUIRING FUNCTION
(1) In cooking state, press “CLOCK/ KITCHEN TIMER”, the screen will display clock for three seconds.
(2) In the microwave cooking state, press “POWER” to inquire microwave power level, and the current microwave
power will be displayed. After three seconds, the oven will turn back to the previous state. In multi-stage state,
the inquiring way can be done by the same way as above.
COOKING END REMINDING FUNCTION
When the cooking is over, the buzzer will sound 5 “beep” to alert user the cooking is finished.
OTHER SPECIFICATIONS
(1) In standby state, if the set clock digital tube displays current time, the icon “ : “ would flash; otherwise, it shows
“0:00“.
(2) In setting function state, the screen displays corresponding setting.
(3) In working or pause state, the screen displays surplus cooking time.
20180116_ER-SGS20_25_34_MY.indd 13 2018/01/16 14:42:13