To Next PageTo Next Page
Need help?Do you have a question about the Toshiba MMD-AP0121BH and is the answer not in the manual?
General| Category | Air Conditioner |
|---|---|
| Cooling Capacity (kW) | 3.5 |
| Heating Capacity (kW) | 4.0 |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R410A |
| Cooling Capacity | 12000 BTU |
| Operating Temperature (Cooling) | 18°C to 43°C |
Covers warnings for installation, use, moving, and repair of the air conditioner.
Details cautions regarding installation, earthing, and fixing methods.
Identifies parts for various indoor unit types like cassette and duct models.
Details the display and operation sections of the remote controller.
Explains air direction settings for cassette and other unit types.
Provides instructions on how to start and stop the swing function.
Guidelines for selecting a suitable installation location.
Covers safety warnings and requirements for electric wiring.
Instructions for cleaning and resetting the air filter.
Procedures for cleaning the air inlet grille and main unit.
Details checks before operation and performance characteristics.
Lists symptoms and their potential causes for troubleshooting.
Lists required tools and handling cautions for R410A refrigerant.
Specifies required installation space and locations to avoid.
Illustrates pipe connection methods for different models.
Details pipe dimensions, material, and capacity codes.
Covers airtight testing, air purge, and pipe heat insulation.
Covers electrical wiring design and power supply specs.
Details wiring connections for power and control.
Explains automatic and manual address setup procedures.
Guides on confirming and changing indoor unit addresses.
Covers connection cautions and item code setup for FS units.
Instructions for performing test operations via remote controller.
Details test operations using the outdoor unit interface P.C. board.
Explains segment display and check codes for troubleshooting.
Lists check codes specific to the outdoor unit.
Lists included accessory parts and their usage.
Step-by-step guide for installing the flow selector unit.
Details permissible pipe length and dimensions.
Instructions on pipe flaring, projection, and connection.
Wiring connections for indoor units.
Wiring connections for the flow selector unit.
Cautions for connecting multiple indoor units to an FS unit.
Guidelines for checking refrigerant concentration limits in rooms.
