To Next PageTo Next PageWhat to do if the Toshiba MMU-AP0071MH Air Conditioner remote controller displays a check code and indoor unit number?
When a fault occurs, the remote controller displays a check code and indoor unit number. To address this, operate the air conditioner according to the instructions for 'Confirmation of error history'.
How to check error history on a Toshiba MMU-AP0071MH?
To confirm the error history on your Toshiba Air Conditioner after a fault, simultaneously push the SET and TEST buttons for at least 4 seconds. The display will then show the CODE No., UNIT No., and Check Code.
What happens if I push the CL button on my Toshiba Air Conditioner remote?
Pushing the CL button will erase all of the error history for that indoor unit. To keep the error history, avoid pressing the CL button.
How to confirm error history on Toshiba MMU-AP0071MH Air Conditioner?
To view the error history on your Toshiba Air Conditioner, simultaneously push the SET and TEST buttons for at least 4 seconds.
Why should I avoid pushing the CL button on my Toshiba MMU-AP0071MH Air Conditioner?
Avoid pressing the CL button on your Toshiba Air Conditioner because doing so will erase the entire error history for that indoor unit.
General| Brand | Toshiba |
|---|---|
| Model | MMU-AP0071MH |
| Category | Air Conditioner |
| Language | English |
Crucial guidelines for safe installation to prevent hazards and injuries.
Essential advice for safe operation, moving, and repair to prevent injury.
Steps for initial setup, mode selection, and air volume adjustment.
Procedures for managing timer operations, including setting and cancellation.
Guidelines for selecting a safe installation site and connecting electrical wiring.
Common symptoms and their likely causes for indoor and outdoor units.
