To Next PageTo Next PageWhat to do if my Toshiba MMY-MAP1404FT8-E shows error E16?
If your Toshiba Air Conditioner displays error code E16, it indicates a capacity overload or an issue with the number of connected indoor units. Check if the capacity is exceeded (error code 00) or if the number of connected units is the problem (error code 01 and up).
Why does my Toshiba Air Conditioner show error E26?
If your Toshiba Air Conditioner displays error code E26, it indicates a decrease in the number of connected outdoor units. Verify the number of outdoor units which were normally received and the detected outdoor unit number.
What causes error E06 on a Toshiba MMY-MAP1404FT8-E Air Conditioner?
If your Toshiba Air Conditioner displays error code E06, it means there's a decrease in the number of indoor units. Verify the number of indoor units which were normally received.
What does error E19 mean on my Toshiba MMY-MAP1404FT8-E Air Conditioner?
If your Toshiba Air Conditioner displays error code E19, it indicates an error with the number of header outdoor units. Specifically, error code 00 means there is no header, while code 02 indicates 2 or more header units are present.
How to troubleshoot automatic addressing start error on a Toshiba Air Conditioner?
If your Toshiba Air Conditioner displays error code E12, it indicates an automatic addressing start error. Solution: Check the communication between indoor and outdoor units (01) and the communication between outdoor units (02).
What does it mean when my Toshiba MMY-MAP1404FT8-E displays error E20?
If your Toshiba Air Conditioner displays error code E20, it means other lines are connected during automatic addressing. Specifically, error code 01 indicates another outdoor line is connected, while code 02 indicates another indoor line is connected.
What does error code E31 mean for Toshiba MMY-MAP1404FT8-E?
If your Toshiba Air Conditioner displays error code E31, it indicates a communication error between the MCU and sub MCU. This may involve IPDU quantity information, with 80 specifically indicating an IPDU communication error.
General| Brand | Toshiba |
|---|---|
| Model | MMY-MAP1404FT8-E |
| Category | Air Conditioner |
| Language | English |
Explains various warning symbols and their meanings for safe operation and maintenance.
Essential safety guidelines for installation, operation, and handling of the air conditioner.
Safety measures during operation, electrical safety, and repair/relocation procedures.
Provides visual symbols and instructions for safe handling, stacking, and storage of the product carton.
Identifies key components of the outdoor unit, such as air intake, discharge, and connectors.
Details components for the 4-way cassette and compact 4-way cassette indoor units.
Details components for 2-way, 1-way cassette, and concealed duct standard/high static pressure indoor units.
Outlines components for slim duct, ceiling, floor standing, and cabinet type indoor units.
Explains the various indicators and information displayed on the remote control LCD screen.
Describes the function of each button on the remote controller for operating the air conditioner.
Step-by-step guide for basic air conditioner operation, including preparation and mode selection.
Adjusting temperature, fan speed, and activating power save mode for efficient operation.
Guides on how to set and cancel various timer functions, including OFF, Repeat-OFF, and On timers.
Recommendations for choosing an appropriate installation location and managing operational sounds.
Essential checks before operation, performance notes, and system protection measures.
Notes on operational range and indicators when outdoor temperatures are outside limits.
How to adjust the louver direction for optimal cooling, heating, or fan modes.
Instructions for controlling louver swing, locking them, and selecting swing patterns.
Options for adjusting horizontal airflow and specific controls for different unit types.
Recommendations for cleaning filters, proper room sealing, and temperature settings.
Emphasizes regular cleaning of air filters and safety warnings for maintenance tasks.
Guidelines for cleaning indoor units, remote controllers, and preparing the unit for storage.
Lists common symptoms, their causes, and troubleshooting steps before seeking repair service.
Procedure for checking error codes and critical safety precautions during troubleshooting.
Details technical specifications for different model types, including sound and weight.
Official declaration of compliance with relevant machinery directives and harmonized standards.
