User's Manual Optional Devices 8-3
Version
5
Last Saved on 20/12/99 04:11
Portege 7140CT User's Manual – 7140_UK.doc – ENGLISH – Printed on 20/12/99 as
IM_714UK
2.
Insert the PC Card as shown in the following illustration. When the card is
almost fully seated, you will feel some resistance. Press gently to assure a
firm connection, but do not force the card into position. The eject latch will
move to the lock position when the card is fully seated.
Inserting the PC Card
3.
Check the configuration in the Hardware Setup or TSETUP program to
make sure it is appropriate for your card.
Removing the PC Card
To remove the PC Card, follow the steps below.
1.
Quit all applications supporting the card.
If the card does not support hot undocking, be sure to shut down the
computer before removing the card.
2.
Slide the eject latch to the right for the card you want to remove . The
left latch ejects the card in slot “1” and the right latch ejects the card in
slot “0.”
3.
Grasp the card and pull it out.
Removing the PC Card
To Next Page
Loading...
Need help?
General