4-26 User’s Manual
PORTÉGÉ M700
8. Slide the Ultra Slim Bay latch to the unlock position.
9. Grasp the optical disc drive and slide it out.
Removing the optical disc drive
Inserting a module
To insert the Ultra Slim Bay HDD Adaptor, follow the steps as described
below:
1. Insert the Ultra Slim Bay HDD Adaptor in the computer as shown below
and press until the Ultra Slim Bay latch clicks.
2. Remove the Ultra Slim Bay lock screw from the Unlock position.
3. If you want to lock the Ultra Slim Bay HDD Adaptor, set the Ultra Slim
Bay lock screw in the hole for the lock position.
Inserting the Ultra Slim Bay HDD Adaptor
The optical disc drive and other Ultra Slim Bay modules can become hot
with use. Be careful when removing the module.
Lock screw (Unlock position)
Optical disc drive
Ultra Slim Bay latch
Lock position
Store the DVD Super Multi drive unit (UJ-862 model only) in the Ultra Slim
Bay Case when removing it from the computer or transporting it.
Refer to Ultra Slim Bay Case (UJ-862 model only) section in this chapter.
Ultra Slim Bay
HDD Adaptor
Lock screw
(Lock position)
Unlock position
To Next Page
Loading...
