LCD Sensor switch This switch senses when the display panel is
either closed or opened and activates the Panel
Power Off/On feature as appropriate. For
example, when you close the display panel the
computer enters Hibernation Mode and shuts
itself down and then, when you next open the
display, the computer will automatically start up
and return you to the application you were
previously working on.
You can specify within the Power Options. To
access it, click Desktop -> Desktop Assist(in
taskbar) -> Control Panel -> System and
Security -> Power Options.
Do not put any magnetic objects close to this switch as they may cause the
computer to automatically enter Hibernation Mode and shut down even if
the Panel Power Off feature is disabled.
Function button Depending on the model you purchased, this
function button can either be TOSHIBA eco
button or 3D button.
TOSHIBA eco button
Press this button to launch the TOSHIBA
eco Utility. TOSHIBA eco Utility can be used
only in Windows
®
8. The button glows green
when eco mode is on.
3D button
Press this button to enable or disable 3D
Vision. This button also allows you to enable
or disable 2Dto3D conversion function when
TOSHIBA VIDEO PLAYER is running.
Before using 3D button, 3D Vision setup
should be finished. Please refer to NVIDIA®
3D VISION™ section for more information.
Power button Press this button to turn the computer's power on
or off.
Display hinges The display hinges allow the display panel to be
positioned at a variety of easy-to-view angles.
Stereo speakers The speakers emit sound generated by your
software as well as audio alarms, such as low
battery condition, generated by the system.
User's Manual 3-9
To Next Page
Loading...
Need help?
General