4 Replacement Procedures 4.28 Hinge
4.28 Hinge
Removing the Hinge
To remove the hinge, follow the steps below and refer to Figure 4-41.
1. Remove the following screws securing the hinges.
• M2×4C S-THIN HEAD ×2
• M2×2.4C S-THIN HEAD ×2
2. Remove the hinges (right and left) and key plate from the LCD cover.
4-86 [CONFIDENTIAL] PORTÉGÉ R600 Maintenance Manual (960-709)
Figure 4-41 Removing the hinge
Hinge L
Hinge R
M2x4C S-THIN HEAD
M2x4C S-THIN HEAD
LCD cover
M2x2.4C S-THIN HEAD
M2x2.4C S-THIN HEAD
Key plate
To Next Page
Loading...
