Need help?Do you have a question about the Toshiba RAS-18UFHP-ES and is the answer not in the manual?
General| Power Supply | 220-240V, 50Hz |
|---|---|
| Refrigerant | R410A |
| Indoor Unit Dimensions (W x H x D) | 800 x 290 x 200 mm |
| Outdoor Unit Dimensions (W x H x D) | 780 x 540 x 285 mm |
| Type | Split System |
Lists included accessories for the air conditioner.
Details the components related to air filtration.
Covers critical DANGER, WARNING, and CAUTION statements.
Specific safety considerations for installing the unit.
Safety guidelines to follow during unit operation.
Identifies parts of the outdoor unit.
Identifies parts of the indoor unit.
Explains the meaning of indicators on the indoor unit display.
Describes the function and use of the temporary button.
Covers START/STOP, MODE, Temperature, and FAN buttons.
Details SWING and FIX buttons for airflow adjustment.
Explains OFF/ON timers, Reserve, Cancel, Hi POWER, MEMO, AUTO, ECO, and FILTER buttons.
Explains all indications on the remote control display.
Instructions for inserting and replacing batteries.
Steps for the first time clock setup.
Procedures to change the current clock time.
Detailed steps for installing air filters.
Cautions for proper remote control handling and placement.
Guidelines for installing the remote control holder.
How the unit automatically selects cooling, heating, or fan only.
How the unit switches modes based on temperature.
Steps for selecting and operating these modes.
Steps for selecting and operating the dry mode.
How to use Hi POWER for rapid cooling or heating.
Procedures for setting ON and OFF timers.
Setting both ON and OFF timers simultaneously.
Setting combined timers for automatic daily activation.
How to cancel active timer settings.
Instructions for saving frequently used settings.
How to recall and use memorized settings.
Methods for adjusting vertical louvers.
Manual adjustment of horizontal airflow.
Important cautions related to airflow direction settings.
How to enable the automatic restart feature.
How to disable the automatic restart feature.
How the unit selects modes based on temperature.
Explanation of Hi POWER and ECO timer operations.
Specifics of the dry operation mode.
Advice on efficient operation and maintenance.
Using the unit without the remote control.
How to reset the air filter cleaning indicator.
Instructions for cleaning the unit and remote control.
Steps for preparing the unit for extended non-use.
Essential checks before operating the unit.
Step-by-step guide for cleaning air filters.
Maintenance and replacement schedule for Zeolite filters.
Maintenance and replacement schedule for Purifying filters.
Details on protection features and heating characteristics.
Explanation of defrosting and heating capacity limits.
Advice on placement and power failure handling.
Recommended temperature and humidity ranges for operation.
Actions for serious issues indicated by blinking lamps.
Preliminary checks before seeking service.
Causes and solutions for poor cooling or heating.
Explanations for unusual noises and smells.
Observations on lamp status and airflow changes.
Explanations for frosting and white mist from the outdoor unit.
Product model, power supply, and capacity specifications.
Cooling and heating amps and watts data.
Size and weight specifications for indoor and outdoor units.
Conditions under which cooling and heating capabilities are rated.
Problems with changing modes or fan speed via remote.
Troubleshooting display errors and lack of signal feedback.
To Next Page
