Need help?Do you have a question about the Toshiba RAS-22N3KV-E and is the answer not in the manual?
General| Type | Split System |
|---|---|
| Cooling Capacity | 2.2 kW |
| Heating Capacity | 2.5 kW |
| Refrigerant | R410A |
| Power Supply | 220-240V, 50Hz |
| Outdoor Unit Dimensions (W x H x D) | 660 x 530 x 240 mm |
| Indoor Unit Weight | 9 kg |
| Noise Level (Outdoor) | 48 dB(A) |
Power supply cord requirements for outdoor appliance use.
Important safety notes for installing new refrigerant air conditioners.
Critical safety warnings regarding electrical shock, fire, and explosion risks.
Precautions for handling R410A refrigerant due to its high pressure.
Guidelines for selecting and installing piping materials and joints for R410A.
Detailed diagrams and dimensions of the indoor air conditioner unit components.
Detailed diagrams and dimensions of the outdoor air conditioner unit components.
Comprehensive schematic showing electrical connections between indoor and outdoor units.
Specifications for components within the indoor unit, like sensors and motors.
Specifications for components within the outdoor unit, including compressor and fan motors.
Schematic illustrating the flow of refrigerant through the air conditioning system.
Diagram showing the control logic and signal flow for the indoor unit.
Diagram illustrating the control logic and signal flow for the outdoor unit.
Overview of the control system and the roles of indoor/outdoor units.
Details on how to start, stop, and control the air conditioner's basic functions.
Procedure to enable the automatic restart feature after power interruption.
Procedure to disable the automatic restart feature.
Identification and functions of buttons and indicators on the remote controller.
Instructions for basic operations like ONE-TOUCH, AUTO, and mode selection.
Visual guide for positioning and mounting indoor and outdoor units.
Steps and considerations for installing the indoor unit, including placement.
Guidelines for selecting the installation location and precautions for the outdoor unit.
Procedures for correctly installing the drain hose for proper water removal.
Initial checks for power supply, voltage, and normal operation modes.
Interpreting indoor unit LED indicators for self-diagnosis and error codes.
Using the remote controller in service mode to diagnose faults and check codes.
Troubleshooting guide for issues related to interconnecting and serial signal wires.
Procedures for checking the indoor unit's main P.C. board for defects.
Diagnostic steps to identify and resolve issues with the remote controller.
Method to determine if the outdoor fan motor is functioning correctly.
Step-by-step instructions for replacing major components of the indoor unit.
Procedures for detaching and attaching main parts of the outdoor unit.
Detailed breakdown of components for the indoor unit with part numbers.
Detailed breakdown of components for the outdoor unit with part numbers.
To Next Page