FILE NO. SVM-06021
ā 72 ā
No. Part name Procedures Remarks
5 7) Remove 2 screws and remove the
refrigeration assembly with pushing it to
right hand.
6 <How to remove the Multiblade fan and
Fan motor>
1) Remove the Air inlet grille and the Front
panel. (1, 2)
2) Disconnect 2 connectors.
3) Remove the Fan covers.
4) Remove the Motor band with holding the
Fan motor and then remove the Fan motor
with the Multi-blade fans.
5) Unfasten the Set-screw and remove the
Multi-blade fans.
Refrigeration
assembly
Multiblade fan
and Fan motor
Fan cover
Motor band
Motor
2 Connectors
Multi-blade fan
2 Screws
To Next Page
Loading...
