Need help?Do you have a question about the Toshiba RAS-24UAH-ES and is the answer not in the manual?
General| Category | Air Conditioner |
|---|---|
| Type | Split System |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R410A |
| Cooling Capacity | 24000 BTU/h |
| Seasonal Energy Efficiency Ratio (SEER) | 6.0 |
| Weight (Indoor Unit) | 15 kg |
| Weight (Outdoor Unit) | 30 kg |
| Noise Level (Outdoor) | 55 dB(A) |
Critical warnings about installation, repair, and electrical hazards.
Important advice for safe and proper installation to prevent issues.
General cautions regarding disconnection from the main power supply.
Precautions to take during normal operation to ensure safety.
Safety guidelines for moving and repairing the unit.
Specific installation advice regarding drainage, power supply, and location.
Important operational advice covering usage, ventilation, and electrical safety.
Identifies components of the outdoor unit.
Identifies components of the indoor unit.
Explains the indicators on the indoor unit's display panel.
Describes the function and usage of the temporary operation button.
Covers START/STOP, MODE, TEMPERATURE, and FAN controls.
Explains SWING and FIX buttons for adjusting air flow.
Details on setting ON/OFF timers, RESERVE, and CLR functions.
Covers HI POWER, AUTO, ECO timer, and FILTER button functions.
Instructions for memorizing and recalling operation settings.
Explains transmission mark, mode, temperature, fan speed, and timer displays.
Covers Hi POWER, MEMORY, and ECO TIMER displays.
Guide for inserting batteries, resetting, and setting the clock.
Advice on battery replacement and storage for optimal performance.
Procedure for setting the clock when batteries are first inserted.
Steps to adjust the clock after initial setting using TIMER and SET buttons.
Instructions for opening grille, removing, cleaning, and installing air filters.
Warnings regarding signal obstruction, liquid, and direct sunlight.
Guidance on placement for signal reception and mounting the holder.
How to initiate automatic operation using START/STOP and AUTO buttons.
How to stop the air conditioner.
How to start AUTO CHANGEOVER mode using START/STOP, MODE, and TEMP buttons.
How to stop the air conditioner.
Steps to start cooling, heating, or fan only modes using remote buttons.
How to stop the air conditioner operation.
Steps to start dry operation mode using remote buttons.
How to stop the air conditioner operation.
Explains Hi POWER mode's rapid cooling/heating function.
Instructions for turning Hi POWER mode on and off.
Guide to setting timers using TIMER, SET, and CLR buttons.
Instructions for setting OFF-ON and ON-OFF timer sequences.
How to set timers for automatic daily activation.
Procedure to cancel all timer operations.
Steps to save frequently used settings using the MEMO button.
How to activate stored settings using the PRESET button.
Using FIX and SWING buttons for vertical louver control.
Manual adjustment of horizontal air flow direction.
Important cautions regarding airflow settings and manual adjustments.
Details on the automatic restart feature after power interruption.
Procedure to enable the auto restart function.
Procedure to disable the auto restart function.
How the unit automatically selects cooling, heating, or fan mode.
Explanation of Hi POWER mode for rapid temperature control.
How the ECO timer optimizes energy use by adjusting settings.
Explains the function of dry mode for dehumidification and cooling.
Tips on temperature, filter cleaning, and window/curtain usage.
Guidance on using timers and air circulation for efficiency.
How to operate the unit temporarily without the remote control.
Procedure to turn off the filter cleaning indicator lamp.
Guidelines for safely cleaning the indoor unit and remote control.
Steps to take when the unit will not be used for over a month.
Essential checks to perform before resuming operation.
Step-by-step instructions for cleaning the air filters.
Cleaning and replacement guidelines for Zeolite filters.
Cleaning and replacement guidelines for Purifying filters.
Explains protection, heating, defrosting, and power failure behavior.
Covers heating capacity, snow considerations, and preheating.
Recommended conditions for cooling, heating, and dry modes.
Actions to take for serious issues requiring dealer contact.
Checks for power, batteries, and timer settings when unit is not working.
Troubleshooting steps for poor cooling or heating.
Reasons for dewdrops, strange noises, and room odors.
Explanation for the OPERATION lamp blinking pattern.
Covers frosting, defrosting, airflow changes, and mist generation.
How the vertical air flow louver automatically adjusts.
Information on model numbers and power supply requirements.
Specifications for cooling and heating capacity, amps, and watts.
Details on unit dimensions and net weight.
Conditions under which air-conditioning capabilities are determined.
Resolving issues with changing fan speed in AUTO or DRY modes.
Troubleshooting blank or disappearing remote display and timer indications.
Resolving issues where the indoor unit does not beep.
To Next Page
