EasyManua.ls Logo

Toshiba RAS-2M14U2AVG-E User Manual

Toshiba RAS-2M14U2AVG-E
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Installation Manual
Outdoor Unit
English
Installation Manual
Outdoor Unit
AIR CONDITIONER (MULTI-SPLIT TYPE)
Model name:
RAS-2M10U2AVG-E
RAS-2M14U2AVG-E
RAS-2M18U2AVG-E
RAS-3M18U2AVG-E
* NOTE:
Descriptions about operations for the 3 indoor units in
this manual are not applicable to RAS-2M10U2AVG-E,
RAS-2M14U2AVG-E and RAS-2M18U2AVG-E.
R32
Question and Answer IconNeed help?

Do you have a question about the Toshiba RAS-2M14U2AVG-E and is the answer not in the manual?

Toshiba RAS-2M14U2AVG-E Specifications

General IconGeneral
Cooling Capacity (BTU)14000
Cooling Capacity4.1 kW
Number of Connectable Indoor Units2
RefrigerantR32
Power Supply220-240V, 50Hz
TypeMulti-split Air Conditioner
Noise Level (Outdoor)49 dB

Summary

Precautions for Safety

Warning Indications and Hazard Symbols

Explains hazard symbols like DANGER, WARNING, and CAUTION for safe operation.

Installation and Service Tools

Unit Specifications and Compatibility

Installation Parts and Accessories

Outdoor Unit Installation Location and Space

Site Selection Criteria for Outdoor Unit

Specifies suitable locations, avoiding hazards, noise, and obstructions.

Required Space and Clearance

Outlines clearance needed around the unit for airflow and access.

Cold Climate Installation Guidance

Provides guidance for installing in snowy or cold regions.

Refrigerant Piping and Connection

Pipe Connection and Flaring Techniques

Details pipe cutting, flaring, and connection steps for refrigerant lines.

Vacuum Pump for Air Purge Procedure

Explains how to remove air and moisture from the refrigerant cycle.

Refrigerant Pipe Insulation Best Practices

Advises on insulating refrigerant pipes for optimal system efficiency.

Electrical Work and Wiring Safety

Electrical Hazards and Wiring Precautions

Highlights risks associated with wiring, power connections, and grounding.

Wiring Connection Diagrams

Illustrates wiring for indoor/outdoor units and power source connections.

Grounding and Test Run Procedures

Essential Grounding Requirements

Explains the importance and method of grounding the unit for safety.

Wiring and Piping Verification Check

Details the procedure for verifying connections before initial operation.

Test Run Diagnostics and Customer Guidance

Interpreting LED Status and Error Codes

Interprets LED status for troubleshooting installation issues.

User Operation and Maintenance Instructions

Provides instructions for the end-user on operation and features.

Pump-down Operation and Troubleshooting

Refrigerant Recovery (Pump-down) Procedure

Outlines the procedure for safely recovering refrigerant from the system.

Troubleshooting with LED Indicators

Lists potential problems and their corresponding LED indicators for diagnosis.

Appendix: Installation Work Instructions

Reusing Existing Refrigerant Pipes for R32

Provides conditions and restrictions for reusing old refrigerant pipes.

Pipe Protection and Curing Methods

Explains how to protect pipes from moisture and rust during installation.

Related product manuals