To Next PageTo Next Page
Need help?Do you have a question about the Toshiba RAV-164A-PE and is the answer not in the manual?
Identifies components of the wall-mounted indoor unit, including earth screw, air intake, outlet, and filter.
Details components for the 4-way cassette indoor unit, such as earth screw, outlet, grille, and intake.
Lists components for the built-in duct indoor unit, including earth screw and air outlet.
Describes components of the ceiling-mounted indoor unit, like earth screw, air intake, outlet, and filter.
Highlights critical safety measures, including warnings about poking objects into grilles and general precautions.
Specifies temperature and humidity ranges for optimal cooling and heating operation.
Details how to adjust louvers horizontally and use fixed positions for optimal air distribution.
Explains airflow settings for cooling (horizontal) and heating (downward) operations, with cautions.
Describes how to adjust sub-louvers for changing the lateral direction of the blown air.
Guides on setting airflow horizontally for even cool air distribution in the room.
Instructs to direct airflow downward for efficient warm air distribution to the feet.
Explains setting louvers horizontally for even cool air distribution.
Guides on directing louvers downward for warm air distribution at floor level.
Instructs to set louvers horizontally for even cool air distribution.
Guides on setting louvers to midway or downward for heating.
Details horizontal and fixed louver settings for improved cooling and heating effects.
Explains airflow settings for cooling (horizontal) and heating (downward/midway) operations.
Explains setting the main louvre vertically for cooling and forward for heating.
Describes adjusting sub-louvers for changing the lateral direction of the blown air.
Highlights safety measures like turning off power before cleaning and avoiding water spray.
Explains the importance of clean filters for airflow and recommends regular cleaning.
Provides step-by-step instructions for removing air filters from various indoor unit types.
Explains how to clean air filters and external surfaces using appropriate methods and materials.
Provides guidance on preparing the unit for periods of non-use and restarting it afterwards.
Lists checks to perform before contacting service, related to power, settings, and airflow obstructions.
Addresses common problems like poor cooling or heating, including possible causes like overheating or incorrect settings.
Explains how to enter service mode and interpret fault codes for specific unit models to aid in diagnosis.
Details optimal placement for indoor and outdoor units, considering space, ventilation, environment, and noise.
Emphasizes proper earthing, dedicated power sources, circuit breakers, and fuse replacement for electrical safety.
Notes that relocation requires special techniques and suggests contacting a dealer for the service.
Advises on recycling, contacting authorities, and proper disposal of packaging materials.
Stresses that refrigerant removal must be done by authorized personnel due to legal and environmental implications.
General| Brand | Toshiba |
|---|---|
| Model | RAV-164A-PE |
| Category | Air Conditioner |
| Language | English |
