To load a disc, press to open the disc tray.
Face the side to use (for
double sided disc) or the
printed side (for single sided
disc) up, and insert the
cartridge into the tray frame
following the direction of the
arrow on the cartridge.
Place a disc in
the inside hollow.
Disc without cartridgeDVD-RAM disc with cartridge (TYPE1/TYPE2/TYPE4)
After loading a disc, press
again to close the disc tray.
To view the loaded disc, press
.
To play a DVD-Video disc
Load a disc and press
.
When a top menu appears
Some DVD video discs may include a top menu, on
which you can view the structure of contents or select a
scene. Most of the top menus automatically appear in
certain scenes, and also are displayed on demand.
Actual operation of the top menu depends on the disc.
This section explains a general example of how to
operate a top menu. Also refer to the instructions of the
disc itself.
1) Press TOP MENU.
2) Press
/ / / to select the title you want.
If the titles in the top menu are assigned a number,
you can directly locate a specific title by pressing its
designated number with the number buttons.
3) Press OK/ENTER.
Changing playback speed
To go back by the
specified time.
To skip by the
specified time.
To play in fast reverse
or fast forward.
To stop playback.
To pause playback.
To skip chapters or
tracks.
To play in slow-motion.
To play frame by frame.
RD-85DT_QG_E 3/27/06, 17:365
To Next Page
Loading...
Need help?
General
