Toshiba SA-400 - User Manual

1.
Antenna input
impedance:
Usable sensitivity
Signal-to Noise ratio:
FM-stereo separation:
Capture ratio (IHF):
Tuning indication:
AM tuner section
Usable sensitivity
(IHF):
Image rejection ratio:
iF retection ratio:
Antenna:
Tuning indication:
Audio section
Total IHF music
power output
(0.8% distortion):
Total r.m.s. continuous
power output
(0.8% distortion):
Harmonic distortion:
intermodulation
distortion:
TOSHIBA
SPECIFICATIONS
FM tuner section
300 ohms (balanced)
75 ohms (unbalanced)
2.5 UV
less than 0.6%
100% modulation)
less than 0.9%
100% modulation)
better than 60 dB
(Stereo,
better than 45 dB (400 Hz)
less than 2 dB
tuning meter
20uV
35:dB
30 dB
Built-in ferrite core antenna
tuning meter
30 Watts (4 ohms)
40 Watts (8 ohms)
20 Watts (16 ohms)
22 Watts (4 ohms)
30 Watts (8 ohms)
18 Watts (16 ohms)
at rated power output)
W output)
4
oe ata W/4
Zo {
(
0.8% (at rated power output)
0.2% (at 1 W/1 W output)
(Mono, 400 Hz
400 Hz,
Input sensitivity and
impedance and S/N:
Recording output level:
Resial noise:
Speaker impedance:
MFR response:
Power source:
Power consumption:
Dimensions
net
gross 21(W
Weight
net 14% Ibs
gross 17% Ibs
PHONO 47 Kohm, 3mV, 65 dB
AUX 100 Kohm, 200mV , 75 dB
Main input 200mV
200mV (PIN jack)
30mV (DIN jack)
ImvV
4—16 ohm
100 Hz +10dB (TURN OVER
FREQUENCY 1 KHz)
~5 dB (TURN OVER
FREQUENCY 400 Hz)
+10dB (TURN OVER
FREQUENCY 1 KHz)
+5 dB (TURN OVER
FREQUENCY 4 KHz)
+10 dB (100
10,000 Hz
mrs)
riz, VR at 30%)
TA, TC, VL Model :
100/120/220/240 V, 50/60 Hz
TE Model
100/110 ~ 120/220/240V,
50/60 Hz
DTE, DSE Model
110/120/220/240V, 50/60 Hz
55W (at maximum output)
15W (at minimum output)
16%2(W) x 11% (D) x 4%4(H) (inch).
)x 15%(D) x 8%
(H) (inch)
TOKYO SHIBAURA ELECTRIC CO., LTD.
2-1 5-CHOME,
eer
GINZA, CHU
lIO-KU
BN er NS
| TOKYO, JAPA
rm FRA

Toshiba SA-400 Specifications