81
Learning the Basics
Using your CD or DVD drive
Pressing the disc eject button
If the computer is off, either:
❖ Slide the CD/DVD/Media Player power switch to the left
to turn the drive on, and press the stop/eject button twice
to release the disc tray.
❖ Press the manual eject button on the drive, accessed
through the small hole just to the right of the eject button.
For instructions, see “Removing a disc with the
computer off” on page 86.
The disc tray partially opens.
2 Pull the disc tray until it is fully open.
Opening the disc tray
To Next Page
Loading...
