Toshiba Satellite 4060CDT - Using Compact Discs

Learning the Basics
Using compact discs
Using compact discs
This section provides information on inserting, removing and car
ing for your compact discs.
Inserting compact discs into the CD-ROM drive
1 With the computer turned on, press the CD-ROM eject button.
The CD-ROM tray partially opens.
2 Pull the tray until it is fully open.
HINT: The CD-ROM drive will not open if the computer's
) power is off. If you cannot turn on the computer, you can open
the CD-ROM drive manually. Use a straightened paper clip or
other narrow object to press the manual eject button. This
button is accessed through the small hole to the right of the
CD-ROM eject button.
3 Holding the CD by its edges, make sure it is dust-free, then
place it carefully in the tray, label side up.
Inserting a CD into the CD-ROM drive
4 Press down on the disc until it locks on the spindle.
5 Close the drive tray.
Removing a CD from the drive
1 With the computer turned on, press the CD-ROM eject button.
Part I: Getting To Know Your Computer