34
Installing additional memory (optional)
5.375 x 8.375 ver 3.1
Removing the keyboard exposes the two memory slots, which are
covered by a plastic sheet.
Locating the covered memory module slots
5 Lift (but don’t detach) the plastic sheet to expose the memory slots.
Lifting the plastic covering the memory slots
6 Remove the new memory module from its antistatic packaging.
Static electricity can damage the memory module. Before you handle the
module, touch a grounded metal surface to discharge any static electricity
you may have built up.
To avoid damaging the memory module, be careful not to touch its pin
connector (on the side you insert into the computer).
Covered
memory
module
slots
To Next Page
Loading...
