111
Learning the Basics
Using Hibernation
5.375 x 8.375 ver 3.1
To put the computer into Hibernation mode by pressing the
power button or closing the display panel, you must preset the
mode.
1 Open the Start menu, click Control Panel, then
Performance and Maintenance.
2 Click the Toshiba Power Saver icon.
3 Click the Setup Action tab.
The TOSHIBA Power Saver Properties window appears.
Sample TOSHIBA Power Saver Properties window
4 Select Hibernation for the options you want.
❖ When I press the power button
Set this option to Hibernate so that the computer
will go into Hibernation mode when you press the
power button.
❖ When I close the lid
Set this option to Hibernate so that the computer
will go into Hibernation mode when you close the
display panel.
5 Click Apply.
To Next Page
Loading...
