The software doesn’t support multiuser account operation.
The software cannot work under a guest account.
The software may not work properly when the camera is facing strong
light or the computer is placed in dark environment.
Small hand(e.g.kids’) may not be detected properly.
You may need to restart the TOSHIBA Gesture Controller or sign in
again to ensure that the utility works properly If the text size on the
screen has been enlarged or the resolution changed.
Starting TOSHIBA Gesture Controller
The TOSHIBA Gesture Controller can be started using the following
methods:
Click the TOSHIBA Gesture Controller icon on the Start screen.
Click TOSHIBA Gesture Controller on the desktop.
Using TOSHIBA Gesture Controller
Raise your hand in front of your computer and operate within the distance
and angle described as below.
Distance range 30cm to 100cm away from the Web Camera to
your hand.
Angle range Within a 60-degree both horizontal and vertical
range of the Web Camera.
Figure 5-1 Operational range
Gestures performed outside the effective operational range may be
missed or incorrectly detected .
Moving too fast may cause losing detection.
Moving something other than a hand fast in front of the camera, might
be treated as a swipe action by the software.
Only one hand operation is supported. Stretching your five fingers can
be tracked easier.
Only landscape orientation screen is supported.
User's Manual 5-14
To Next Page
Loading...
Need help?
General
